The Step-By -Step Guide To Choosing Your Machine Coffee > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

What Goes On Inside a Machine Coffee Maker?

Drinking a cup of joe at home is simple with a coffee machine. The most popular models include an adjustable timer and an integrated grinder.

When you turn on the power the sensors control a heating element that circles the warming plate. It also has an aluminum water tube that runs through it.

Cold-Water Tube

A machine coffee maker takes the water you put into it and turns it into your cup of coffee. It does this by boiling the water and passing it through a device that creates high pressure to push it through a capsule of ground or soluble product. These machines utilize up to 15 bars of pressure, compared to coffee percolators that operate at just one bar.

This reservoir looks like an empty bucket in the bottom of the machine and is where the water is stored to make your drink. The reservoir has a hole at the bottom. It connects to the tube that is inside the heating element on one side and to an insulated tube running from the bottom of the machine to the tap on the other.

When you start your machine, the water inside the reservoir flows to the heating chamber and the thermostat instructs it to warm up. As the water warms up, it expands and pushes onto a screen underneath a portafilter which has been filled with coffee and tamped down. This pressure causes the screen to break through the filter and allow the espresso to flow into your mug.

The espresso that comes from your machine is a rich and delicious brew. It can come with varying levels of acidity, based on the kind of beans you choose. If you notice that your brew is unpleasant try changing to an alternative filter paper or a more coarsely ground coffee. If the issue continues you should make an appointment with an authorized service technician to perform the de-liming procedure to clear out your machine. The most frequent cause of this problem is lime scale.

Hot-Water Tube

The white tube with insulation at the bottom of your machine is hot-water tubing. It transfers hot water from the heating unit to the faucet on top of the coffee maker. This water saturates your grounds, bringing their flavor into the pot of coffee you've been waiting for.

Some coffee makers have an option to keep the water warm, so that it's ready for you as soon as you wake up. This is done by using a heater to generate some steam. The steam is directed towards the spout to ensure that your coffee remains warm until you are ready to pour it.

Although it could appear as if a coffee maker is complex and expensive however, the majority of models are easy to use and have little moving parts. Regular cleaning and use will keep your machine in top condition for many years.

Many coffee machines that have a built-in grinder allow the addition of ground coffee from a container, lock the portafilter into place and then activate the switch inside to start the process of brewing. When the switch is turned the pump will begin to pressurize water in the heating chamber until it's about 220 psi of pressure.

One of the biggest issues when making a cup of coffee is having to refill the reservoir frequently. Some manufacturers have created coffee machines that can be connected directly to your water line. This lets you skip the reservoir. If you're a do-it-yourselfer, there are kits available to convert any machine to one with a water line connection. This is a bit more complex and requires drilling holes into your machine to accommodate an adapter. This could weaken the structure of your coffee maker and lead to cracking around the drill holes. To get the best results, it's recommended to purchase a coffee maker made specifically to accommodate a direct line of water.

Resistive Heat Element

The heater is a piece metal that has a specific kind of electrical resistance. It limits current flow but not stopping it entirely, and some of the energy that is resisting it is turned into heat. This is the way that your coffee maker's boiler is heating the water.

The heating element is located on the left-hand side of the machine's base. It resembles the filament of a lightbulb, or the element of an electric toaster. It consists of an aluminum extrusion with two sections, a tube for water to flow through and the heating element itself that is resistive (Check video here). The resistance of this coiled wire is what causes it to warm up when it receives electricity.

When you turn on your coffee maker, the component heats the aluminum water tube until that it is boiling. Then the bubbles float up through the white tube and are sprayed over your ground coffee by the shower head. The water that is sprayed picks up the essential oil content of the coffee beans as it goes down and it also has caffeine.

If your coffee maker is not release hot water, it's most likely that the pressure switch or heating element thermostat is defective. Both of these can be tested using a multi meter conducting a continuity test. Connect one pole to the electrical connection and the second to the body of the flange and it should display a number below 1. If there isn't any reading then this indicates the thermostat or switch need to be replaced.

The other main part of your coffee machine that could be the source of problems is the water pump, or reservoir. It could get blocked with lime and that is the reason you should run the mixture of water and descaling solution through it.

Warming Plate

A warming plate is an heated metal surface that keeps the coffee warm after it has been brewed. This feature is popular with those who enjoy coffee at a restaurant and is a great addition to the kitchen of a home. However the warming plate can rust quickly and ruin the taste of the coffee, making it crucial to clean it frequently. Cleaning a coffee maker's heating surface is best done using a mixture of oxalic and water.

Oxalic acid can be utilized as powerful cleaner to eliminate the rust from pipes, sinks and gas stove burners. It can also be used for cleaning various other household objects. It is a very effective method of cleaning the rusty warming plate of your professional coffee machines maker, and it is available from many hardware stores. This product can cause serious burns and injuries in the event that it is not handled correctly.

When you are cleaning the heating plate, first check that the coffee maker is not plugged. This will prevent any possible damage caused by the heat from the cleaning products. You should also wear gloves made of rubber, as the oxalic acid can be very harsh on your skin.

Then then, apply white vinegar to the rusty area of the heating plate. It will react chemically with baking soda, and will dissolve the rust. Then, use the rag or brush to scrub the area until it is clean. You may need to repeat this process several times if the coffee maker is heavily rusted. Be sure to wait until the oxalic acids have completely evaporated before plugging the coffee maker in again.

Aluminum Water Tube

When you start your machine, it will start making coffee for you. It may seem it's easy enough, but there's a lot going on in the machine to transform a few scoops of grounds and some water into a steaming hot drink.

First, the cold water goes in through an opening in the reservoir's bottom, and then into the aluminum tube that is beneath the resistive heating element. The aluminum water tube gets heated and, when it reaches boiling point, bubbles appear which push water up the white tube that is located in the center of the coffee maker.

The hot water pours out from the top of the tube, and into a perforated plastic disc called the shower head (or basket in certain barista machines, pediascape.science,). The hot water is sprayed on the coffee grounds, which absorbs its oil-based essence.

Then, the water flows down over the coffee and back up through the filter to your pot. The pump's oscillating force is responsible for this. The contraction and expansion of the bubble boundaries exerts shearing force, which extracts the coffee particles from water, leaving a strong espresso-like beverage behind.

Remember that your machine is dependent upon many different components. They're all interconnected. If you hear strange noises or feel vibrations it could be due to a loose part. Parts that are loose could cause noise and weaken connections, which will lead to additional problems.